| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| 3 on a plate tuners?? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9940 |
Page 1 of 1 |
| Author: | John How [ Thu Dec 21, 2006 1:15 pm ] |
| Post subject: | |
I am looking for a good quality 3-on-plate tuner set for a slot head. I have been using tuners made by or for the National Resophonic company but they are not working so well. I want a plain steel tuner with a white plastic butterbean knob instead of the bronze engraved look of the Waverly's or I would just use them. I have heard that there is a manufacturer in Italy but have not been able to track them down. Thanks in advance for your help!!! |
|
| Author: | crazymanmichael [ Thu Dec 21, 2006 1:19 pm ] |
| Post subject: | |
i do believe allesi(sp), the italian tuner manufacuter whose wares a carried by lmi make what you are after. then you could always use rodgers(sp). |
|
| Author: | A Peebels [ Thu Dec 21, 2006 2:02 pm ] |
| Post subject: | |
John I think that Gotoh makes what You are looking for. I believe that someone on this forum posted some pix a while back. Al |
|
| Author: | John How [ Thu Dec 21, 2006 2:07 pm ] |
| Post subject: | |
I have yet to see a 3-on-a-plate Gotoh. That would be sweet if they did. Does anyone have a source or a pic of that? |
|
| Author: | Steve Kinnaird [ Thu Dec 21, 2006 2:32 pm ] |
| Post subject: | |
John, Schaller makes a 3-on-a-plate. Even have white plastic buttons. I've used them a couple of times, and when purchased, they were billed as reso tuners. Just flipped 'em over and they were great. If memory serves, I got those from ILS in Tulsa. But then, memory isn't what it used to be, either. Steve |
|
| Author: | Michael McBroom [ Thu Dec 21, 2006 4:15 pm ] |
| Post subject: | |
I've used Alessi tuners, and they're first rate. LMI doesn't appear to carry his steel string tuners, but you can contact him directly through his website. He will install pretty much any sort or shape of button you want. Here's the only pic of (6-string) ss tuners he has on his website: 
Best, Michael |
|
| Author: | Shane Neifer [ Thu Dec 21, 2006 7:16 pm ] |
| Post subject: | |
Hey John, I am selling Gotoh stuff now as well. They have a TON of options. They have lots of different, 3 on a plate sets that are silver rather than bronze, some engraved some with a simple design cut in them. If you are interested just PM me and I will scan some pics from the catelogue I have and if there is something you like I will track down a price. Shane |
|
| Author: | John How [ Thu Dec 21, 2006 9:46 pm ] |
| Post subject: | |
Thanks for the input guys, I am going to have Shane look into the options and will keep you posted. |
|
| Author: | Hank Mauel [ Fri Dec 22, 2006 3:57 am ] |
| Post subject: | |
John...Have Shane look at item numbers: 40P510C 40P510P 35P510C 35P510P These are steel string shaft 3 on a plate Gotohs, from a catalog several years old. I have some 35P1800 in the shop if you want to touch/see them. They are a 1:14 ratio gearing. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|